IWC watch Cal 8541B International Watch Co. Schaffhausen 1827

SPECIFICATION

Reference : IWC 1827
Movement : Calibre 8541B
Age : circa 1970-1974
Case Size : 33.5mm
Case Thickness : 10mm
Lug to Lug : 39mm
Lugs : 18mm
Condition : used IWC watch
Box & Papers : No
Case Material : Stainless Steel
Warranty : 12-Months Warranty

POINTS TO MENTION

• In great pre-owned condition, with light wear from use
• Case and bezel have light scratches and marks
• Fully serviced pellaton movement
  
• IWC signed fish crown
• Small blemish to the edge of the crystal at 3 o'clock
• Paired with an unworn black leather strap

THE WATCH

We have here a stunning IWC, model 1827 is a classy watch with a fantastic silver dial. The black inlay on the baton hour markers complements the lume on the sword style hour and minute hands and a date aperture at 3. The crown has the fish logo on it, which was to signify that the watch was water resistant when it was produced, but as with all vintage watches we don't recommend getting them wet.

This watch is powered by the Automatic caliber 8541B , that has a beat rate of 19,800, and date complication and 23 jewels, which sits in the stainless steel, 36mm, monocoque case and is paired with a black leather strap.

A BIT OF TRIVA

An automatic watch keeps running only because of the movements of the wearer’s arm. For 60 years now, the power driving IWC’s automatic in-house movements has come from the pawl-winding system developed by Albert Pellaton and improved continuously ever since. In an automatic watch, the rotor converts kinetic energy into potential energy for the spring,

At IWC, the automatic system is inseparably linked with Albert Pellaton, he was appointed Technical Director to the Schaffhausen-based company in 1944 and made the development of an efficient automatic winding system his top priority. From a design point of view, the difficulty lay in converting the rotor’s bidirectional movements into a unidirectional winding motion that would put the mainspring under tension. Most systems back then either diverted the rotor’s movements to a complicated transmission or used only rotations in only one direction to wind the movement. This resulted in considerable power and energy loss.

Pellaton hit upon a surprising solution, instead of putting a ball bearing or cog at the centre of the rotor, he used a heart-shaped, eccentrically bearing-mounted disc. The latter converts the rotor’s revolutions into the to-and-fro movements of a rocking bar. The bar’s rocking movements are then transmitted to the winding wheel by two pawls: while one of them pulls the wheel (i.e. winds it), the other glides smoothly over the top of it until the roles are reversed. The mechanism patented in 1950 is unusually efficient. The rotor’s smallest movement in either direction is used to wind the mainspring

OUR THOUGHTS

The dial on this IWC 1827 that we have in store is in superb condition, which is a rarity as most of these vintage IWC's suffer from patinaed dials. This one also represents a blend of classic design, mechanical innovation, and superior craftsmanship. It stands as a testament to IWC's ability to innovate while honouring traditional watchmaking values, making it a prized piece for aficionados and a reliable timekeeper for everyday wear.